Access Light
The Access unit offers a simple method of providing discreet emergency lighting in areas that require a surface mounted or recessed self-contained solution.
Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Access downlight simply requires a permanent 230Volt supply to provide effective non-maintained emergency lighting with 3hour duration.
Supplied with an IP65 rated polycarbonate base and attractive polycarbonate fresnel lens, Aviator-HO luminaires provide 800 lumen output as standard, with the fresnel lens creating cost effective opportunities to minimise the number of luminaires required within an installation.
The Axiom LED bulkhead utilises an IP65 rated polycarbonate base and fresnel lens housing 16 high output white LEDs and constant current maintained drive circuit. The luminaire provides 90 lumens and the lens generates a wide intensity distribution ideal for providing good illuminance on an escape route. The polycarbonate lens can be fitted with 100mm high, self-adhesive safety signs. A deep (150mm) opal diffuser is also available to provide double sided signage if required.
UTILISING THE LATEST LED TECHNOLOGY, THE DECO LUMINAIRES ARE PERFECT FOR PROVIDING LOW ENERGY/LONG-LIFE LIGHTING SOLUTIONS FOR INTERIOR,EXTERIOR AND AMENITY APLICATIONS.
The Excel range offers decorative surface mounted circular luminaires in two diameters and incorporating high output white LEDs providing ultra-long-life and low energy.
The Excel luminaires utilise an aluminium base (White as standard) and twist-on PMMA diffuser.
Lightsolutions diecast aluminium circular luminaire is an Ideal fitting for indoor or hazardous exterior environments.
The luminaire comes in 15W silver grey or black LED as standard and it is also available with an eyelid variation.
The LED Amenity square luminaire provides an attractive but robust solution for providing lighting to walkways, tunnels, storage areas, car parks etc. The enclosure is sealed to IP65 and houses a geartray with HF electronic driver and multi-circuit LED board. The Polycarbonate lens and halo-effect side band provide excellent photometric performance (1250 luminaire lumens). The robust Cast Aluminium & Polycarbonate enclosure is vandal resistant and provides protection to IP65. Suitable for ambient temperatures of up to 35C (25C for emergency versions) the units are ideal for interior and exterior environments.
LED Amenity luminaires are also available in round housings and with DALI and self-test options.
The LDI3/18/E3 open area light pod (shown)c/w LDCK700S non-maintained kit pack is an ideal integrated stand alone solution that can fit into almost any mains lighting luminaire where space or wiring is restricted for conventional conversions.
The pack can also be supplied with a 50mm Downlighter head to offer a complete standalone downlighter solution.The Led head can come with open area or corridor lens to to maximise coverage depending on application.
Where projects require the advantages of low energy/long life LEDs packaged in standard downlight products for plasterboard ceilings and ceiling tiles there are two simple and attractive solutions.
LDE3 RANGE
The LDE3 downlight offers 105 degree wide angle lens configuration packaged in a very attractive plastic downlight fixing (silver or white plastic) via spring clips into a 45mm diameter cut-out.
For emergency lighting applications (/E3) a 1mm green charge healthy indicator can be incorporated in the bezel.
The LDE3 range of open area and escape route downlighters are available with DALI and self-test.
The LED MIDNA luminaire provides an attractive but robust solution for emergency lighting to external walkways, tunnels, car parks etc.
The enclosure is sealed to IP65 and houses a geartray with HF electronic driver and mains and emergency control gear. The robust powder coated die Cast Aluminium enclosure is vandal resistant and provides protection to IP65.
Suitable for ambient temperatures of up to 25°C the units are ideal for exterior environments.
The versatile Mini LED Projector Luminaires range provides simple and effective emergency lighting from high-intensity LED projectors. Both narrow and wide beam versions are available.
The Mini LED Projector Luminaires range is suitable for applications requiring open area illumination with aesthetic appeal. The compact housings are considerably smaller than traditional twin projector floodlights.
Choose narrow or wide beam
The Mini LED Projector Luminaires range has two distinct variations:
– MiniTS has a clever adjustable narrow beam
– MiniTF has a general wide beam
Both variations feature 2 x 2 watt projector heads, providing over 110 lumens per head from high quality white LEDs, and Nickel Metal Hydride batteries.
The Nautilus 2 range offers decorative surface mounted circular luminaires incorporating high output white LEDs within a ‘sealed’ polycarbonate light source enclosure minimising loss of efficacy due to dirt. The mains driver and emergecy lighting gear is installed in the back of the housing
away from internal heat sources. The main luminaire housing is installed by twisting on to the first fix ring. The Nautilus 2 range offers an exceptional opportunity to design contemporary lighting installations with aesthetic luminaires specifically designed to offer mains only or
maintained emergency lighting with integral Micro-Wave presence detectors for switching the mains operation where required. Nautilus 2 luminaires comply with EN60598.
The TDF (Twin Décor Flood) range offers simple and effective emergency lighting from attractive high intensity LED projectors. More suitable for areas with aesthetic concerns than conventional Twin Projector floodlights the TDF units are ideal for a wide range of applications requiring open area illumination. The 12Watt LED projector heads provide excellent performance and full photometry is available upon request.
The TDF units are supplied with high quality 5year life (VRLA) Valve Regulated Lead Acid batteries.
The TLDWP projector luminaires offer simple and effective emergency lighting from high efficiency LED projectors and suitable for exterior locations.
The TLDWP units feature a novel lens system offering fine optical control resulting in high intensity beam patterns to ensure effective area illumination.
The 6 watt projector heads provide excellent performance. The TLDWP units are supplied with high quality 7.2 volt 4.5Ah NiCd batteries.
DALI/Self-Test
The TLDWP luminaires can be specified with integral DALI/Self-Test gear providing automatic Self-Test in accordance with BSEN 62034 or fully
interoperable DALI operation when connected to a DALI control system.
The Track EM unit offers a simple method of providing discreet emergency lighting in areas that require a self-contained solution powered by the existing track system (Eutrac or Global Track).
Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Track EM luminaire simply connects to a permanent 230 volt supply via the integral track adaptor to provide effective emergency lighting with 3 hour duration.
Standard Self-Test
Incorporating tried and tested emergency driver technology from the ELP proSeries, the Track EM offers self-contained, non-maintained emergency lighting with integral automatic Self-Test.
Optional DALI
Utilising appropriate Eutrac or Global Track with DALI conductors and a DALI test system (such as the ELP SurePath system) the Track EM/DALI option can provide central DALI testing. Switchable maintained operation is possible by using the DALI system to switch the LED on or off in mains healthy conditions.
The TwinLED projector luminaires offer simple and effective emergency lighting from high efficiency LED projectors. The TwinLED units feature a novel lens system offering fine optical control resulting in high intensity beam patterns to ensure effective area illumination. The 6 watt projector heads provide excellent performance and full photometry (LDT files) can be supplied upon request.
The TwinLED units are supplied with high quality 3.6 volt 4Ah NiCd batteries.
DALI/Self-Test
The TwinLED luminaire can be specified with integral DALI/Self-Test gear providing automatic Self-Test in accordance with EN62034 or fully interoperable DALI operation when connected to a DALI control system.